elevation tiles images
27×50-ft-indian-house-front-elevation-design-photo-two-floor-plan

An Indian House Front Elevation Design Photo

Indian house front elevation plan always involves a lot of discussion and planning. However, it is important that you have accurate floor plan before construction commences. If you don’t have an accurate floor plan, the construction process may take longer and cost more. You can even end up spending more money if the original plans are modified during the building process. So, here are some things you need to remember while drawing the Indian house front elevation plan:

The main aim for your designing is to achieve the required floor space within the budget. You can draw the Indian house front elevations on the required scale as per the budget. For example, if you want an extra large drawing then you have to adjust the budget accordingly. You should also consider that the elevations of the house should not cross each other. Cross connections in the plan drawings will increase your cost and reduce the available space. In addition, the plan must be carefully analyzed for accuracy.

An architect carefully draws the elevations of the house, which is then sent for structural analysis. When the required structural analysis is done, the engineer will draw the elevations of the house. He also looks at the required site works like sewer lines, electrical poles, overhead power cables, etc. Once these works are finished, your architect will send the final plan drawing to the contractor for further work. The contractor will take necessary steps to bring the building up to the required standards.

After this phase, your plan drawings will be ready for roof extensions. The roof extensions are the critical stage and require exact knowledge of materials and techniques to create the house front elevation plan. Indian house elevations are designed on a horizontal plane, so it is essential to make the roof extend to the required level. The height of the roof is increased by installing joists on all the rafters, then finishing with a skylight.

Next is the framing of the house. First the building wall is attached to the four corners of the first floor. Then the floor is attached and lastly the skylights are fitted. The floor opening in front of the skylight is one door, as opposed to the British plans which have two doors. This has the advantage of allowing easier opening of the skylight, when the light is low.

The floor plans have several characteristic features. These include: circular floors, skylights, open-air ceilings, raised panels. Circular floors are advantageous in providing air flow throughout the room. They help to keep the temperature constant and maintain comfort during the summer months. Skylights provide natural sunlight during the day and provide heat and lighting during the evening hours.

 

The typical Indian house front elevation plan includes the following: front door facing south, east, and west. The roof line is usually to the north. The east and west facing windows are placed to face the street. The two staircases are located in the corners of the first floor. The plan also has an interior hallway, a stairwell, and a covered passageway.

The Indian house front elevation plan is an ideal plan for an open-sided house, which is well ventilated and keeps the hot and cold weather out. This is another reason why the Indian houses designed with this plan are popular. The house plans with the front elevation are also well planned with the use of different types of materials. These include: bricks, concrete slabs, gypsum boards, and clay tiles.

The materials used for the construction of the house plan with the front elevation are chosen based on their suitability to the climate and climatic conditions of the area where the house is to be built. These houses are energy efficient and easy to maintain. This is mainly due to the fact that the open-sided structure of the house allows for air circulation, which prevents the heat from escaping and the cold air from penetrating, both of which create energy wastage.

The Indian house front elevation design also makes use of the best materials available for the house construction. This includes: stone, bricks, clay tiles, and wood. All these materials are easily available in the market. Some other options that are also popular for house front elevations are: concrete and steel; and steel and gypsum.

A house front elevation photo gives you a bird’s eye view of the whole layout and shows the various features of each level of the house, such as the entrance, the living room, dining room and bedroom. It also has an overall perspective of the entire property. The plan of the house is followed with accurate measurements and exact measures are taken to get an accurate finished product, which has been tested under the different climatic conditions, to ensure that it is strong enough to stand the test of time. It is not uncommon for there to be minor changes made to the plans after the house is under construction, as the buyer is free to make modifications to the floor plan, depending on his requirements. These homes are generally custom made, which can be why they tend to be more expensive than the ready-made ones.

27×50 ft indian house front elevation design photo two floor plan

 

House plan  details

 

Plot size => 27’0*50’0 ft 1350 sq ft

Direction => North

 

Ground floor

 

1 bedroom =>11’13*12’0 ft

WC => 4’0*3’3 ft

Bath => 4’0*7’7 ft

1 Kitchen => 9’6*15’7 ft

1 Living room  => 15’11*16’0 ft

1 Varanda => 10’0*5’0 ft

1 Parking =>9’2*12’0 ft

3 Passage => 5’0*3’3 ft , 4’0*4’0 ft , 4’0*4’0 ft

 

First floor

 

1 Kitchen => 11’3*12’0 ft

 Living room > 15’11*16’0 ft 

1 Bed room > 9’6*15’7 ft

1 WC => 3’3*4’0 ft

1 Bath => 4’0*7’7 ft

 

27×50 ft indian house front elevation design photo two floor plan

  subscribe our youtube channel  

contact now